| Quantity: | |
|---|---|
Product Description
JBH high strength aluminium alloy dead end clamp for overhead line accessories
Tension clamps can be roughly divided into two categories according to different structures and installation conditions. In addition to bearing all the tensile force of the wire or lightning protection wire, the tension clamp also serves as a conductor. Therefore, once this type of cable clamp is installed, it cannot be disassembled and is also called a dead cable clamp. Since it is a conductor, the installation of the cable clamp must be carried out carefully in compliance with the relevant installation operating procedures.
| Modle | Cross -section(mm²) | Failure Load(kN) |
| JBH-1 | 16 | 4.0 |
| JBH-2 | 25 | 6.6 |
| JBH-3 | 35 | 9.3 |
| JBH-4 | 50 | 13.2 |
| JBH-5 | 70 | 15.0 |
Product Description
JBH high strength aluminium alloy dead end clamp for overhead line accessories
Tension clamps can be roughly divided into two categories according to different structures and installation conditions. In addition to bearing all the tensile force of the wire or lightning protection wire, the tension clamp also serves as a conductor. Therefore, once this type of cable clamp is installed, it cannot be disassembled and is also called a dead cable clamp. Since it is a conductor, the installation of the cable clamp must be carried out carefully in compliance with the relevant installation operating procedures.
| Modle | Cross -section(mm²) | Failure Load(kN) |
| JBH-1 | 16 | 4.0 |
| JBH-2 | 25 | 6.6 |
| JBH-3 | 35 | 9.3 |
| JBH-4 | 50 | 13.2 |
| JBH-5 | 70 | 15.0 |
