Home » Products » Cable Accessories » Medium Voltage Cable Accessories » 26/35kv Three Cores Heat Shrinkable Indoor Termination Kit

26/35kv Three Cores Heat Shrinkable Indoor Termination Kit

5 0 Reviews

Quantity:
Availability:





Inquire Add to Basket

Product Description

Product Description

4E-NRS , 4E-WRS , 4E-JRS heat shrinkable cable accessories
4E-NRS, 4E-WRS, 4E-JRS heat shrinkable cable accessories is applied to 35kV and below rubber cable. Heat shrinkable cable accessories is using import multi-phase polymer, it's the update products of wrapped type cable accessories. With convenient installation, keep on suitable radial pressure on the cable body, interface characteristic is good. the parameter type stress control tube to improve the distribution of the electric field, which can effectively solve the cable outer shield section in electric stress concentration problem. The electrical properties are improved from wrapped type cable accessories to ensure the safety and reliable operation. The main components are tubular, basically including stress tube, insulation tube, three fingered tube, sealed tube protective sleeve, etc

Main performance and structure features:
Technical performance: meet BS EN 50181, IEC60502, GB/T12706 requirements.
Heat shrinkable raw materials: stress tube is parameter type, well-distributed electric field at the insulating cable cut off place. Insulating tube has insulation effect, protective sleeve has protection effect. Product heat shrinkable is quite stable, can shrinkable to the original size in heating condition, the residual deformation is small. All the products are processing forming in the factory. There's no need to use fire, no special training, installation is simple and fast.
It has resistance to filth, aging, and good waterproof, with superior cold heat resistant performance.
Surface is smooth and beautiful.

Heat shrinkable outdoor termination

Low Voltage Cable Accessories 1kv Heat Shrinkable Joint Heat-Shrinkable Cable Joint Kit

Lug 2. Cable core 3. Melt adhesive 4. Sealing tube 5. Cable insulation layer 6. Heat shrinkable tube 7. Single hole rain skirt 8. Stress tube 9. Cable semi-conductive layer 10. Copper copper screen layer 11. Three hole rain skirt 12. Trigeminal sheath 13. Earthing wire 14. Cable 15. Triangulation cone

Voltage Section number	1	2	3	4
8.7/15	25-50	70-120	150-240	300-400
12/20,26/35	50-95	120-185	240-400	500-630

Heat shrinkable indoor termination

Lug 2. Cable core 3. Melt adhesive 4. Sealing tube 5. Cable insulation layer 6. Heat shrinkable tube 7. Single hole rain skirt 8. Stress tube 9. Cable semi-conductive layer 10. Copper copper screen layer 11. Three hole rain skirt 12. Trigeminal sheath 13. Earthing wire 14. Cable 15. Triangulation cone

Voltage Section number	1	2	3	4
8.7/15	25-50	70-120	150-240	300-400
12/20,26/35	50-95	120-185	240-400	500-630

Heat shrinkable middle joint

1. Semi conductive tape 2. Waterproof sealant adhesive 3. Semi conductive tube 4. Cable insulation 5. Connecting tube 6. Semi conductive tape 7. Semi conductive layer 8. Outer insulation tube 9. Inner insulating tube 10. Stress tube 11. Copper screen tape

Voltage Section number	1	2	3	4
8.7/15	25-50	70-120	150-240	300-400
12/20,26/35	50-95	120-185	240-400	500-630

Heat shrinkable indoor, outdoor termination, and joint electrical performance parameters

Item	Requirement
Item	8.7/15(17.5)	12/20(24)	26/35(40.5)
5min Power frequency voltage test	39kV, no flashover, no breakdown	54kV, no flashover, no breakdown	117kV, no flashover, no breakdown
Partial discharge test	15kV discharge capacity≤10pC	20kV discharge capacity≤10pC	45kV discharge capacity≤10pC
Lightning impulse test	95kV	125kV	200kV
Lightning impulse test	10 times of positive and negative, no flashover, no breakdown
Constant voltage load cycle test in air	22kV	30kV	65kV
Constant voltage load cycle test in air	The conductor is heated to 95-100ºC, each cycle is 8h, heating 5h and cooling 3H for 60 cycles.
Partial discharge test at high temperature	15kV discharge capacity≤10pC	20kV discharge capacity≤10pC	45kV discharge capacity≤10pC
15min AC voltage withstand test	22kV, no flashover, no breakdown	30kV, no flashover, no breakdown	65kV, no flashover, no breakdown
Negative DC voltage test	52kV, no flashover, no breakdown	64kV, no flashover, no breakdown	156kV, no flashover, no breakdown
4H power frequency voltage test	35kV, no flashover, no breakdown	48kV, no flashover, no breakdown	104kV, no flashover, no breakdown
Outdoor termination salt spray test 1000h	11kV, no flashover, no breakdown	15kV, no flashover, no breakdown	32.5kV, no flashover, no breakdown
Indoor termination humidity test 300h	11kV, no flashover, no breakdown	15kV, no flashover, no breakdown	32.5kV, no flashover, no breakdown

Heat Shrink Termination 26/35kv Indoor Termination Kit

ABOUT US

Our company is a professional company that engaged in production, sales, technology research, technology development and technical services of electrical system products, power engineering design and construction, electrical products, electrical equipment, sales, installation and technical services of energy storage equipment.

QUICK LINKS

PRODUCTS

CONTACT US

2201-7&2201-8, Dongjiu Building, No.888 Jiefang East Road, Yixing City, Jiangsu Province

+86-18020528228

+86-510-87015096

+86-18020528228/+86-18761555908

gm@4e-energy.com